Optional programmable remote controllers allow you to precisely set the temperatures in different rooms. Should you choose not to take a controller the temperatures will be pre-set. Only qualified gas installers are authorised to change any settings inside the cover of a Paloma Gas Geyser.
Allows you to pre set the water temperature in different rooms
Includes a voice prompt
Comes with a bath-fill function to turn off the “hot water” bath tap when the bath has reached the desired level
Remote Controllers do not come with the cable which connects them to the geyser, because all houses are different. Normal Speaker cable is used for this & can either be supplied to you by your gas installer, or you can purchase it yourself from most hardware stores where it will be cut-to-measure & plugs will be fitted for you.
Temperature control at maximum setting: – Ambient +50°C – Flow Rate 2.0 – 5.5 l/min
Temperature control at minimum setting: – Ambient +25°C – Flow Rate 4.0 – 11.0 l/min
Shower or Basin/ Sink (distance dependant)
Manufactured in Portugal, under direct supervision of the parent company in Germany.
Geysers will ignite in low water pressure conditions (ie 1 bar).
Approved for indoor or outdoor installation. Geysers installed indoors must, by law, be fitted with a flue pipe which exits the building (either via the exterior wall or vertically via the roof – may not end in ceiling).
Flue pipes are required for Bosch geysers installed outdoors – without this the geyser will overheat & keep switching itself off.
2 year warranty, providing the geyser is installed by a qualified & registered gas installer.