Loading the content... Loading depends on your connection speed!

| +27 (0)10 227 0044 | All Appliances LPGSSA approved |
Shopping Cart - R0.00

Showing 1–12 of 15 results

grid
list
New!
Rinnai Enduro 13 Gas Heater

PRODUCT DESCRIPTION

  • Portable : can be used in any room with the appropriate gas connection point,
    and stored away when not in use.
  • Low emissions technology
  • Ideal for medium open plan living areas – up to 44m2 or a volume of 106m3
  • 2 year warranty
  • Safety system: oxygen depletion, flame failure and tilt switch shut down systems.
  • Electronic ignition controls with a thermostat for accurate temperature control and 24 hour delay timer.
  • Quiet, high performance filtered multi-speed fan, with air outlet at floor level, provides rapid spread of warmth.
  • LP Gas Consumption : Low 0.09kg/ hr. High 0.28kg/ hr
  • Dual programmable timers – for mornings and evenings
  • Remote control
  • This heater MAY NOT be installed in a room smaller than 62.5m ³
  • Dimensions (HxWxD) : 487 x 492 x 243mm
  • Colours: White or Platinum Silver
  • This heater MAY NOT be installed in a room smaller than 32.5m³

R11,400.00 Inc VAT
New!
Rinnai Avenger 25 Gas Heater

PRODUCT DESCRIPTION

  • Heats up to Capacity (m2) : from 53m³ – to 97m³ depending on ambient temperature
  • Portable : can be used in any room with the appropriate gas connection point,
    and stored away when not in use.
  • Low emissions technology
  • Ideal for large open plan living areas
  • 2 year warranty
  • Safety system: oxygen depletion, flame failure and tilt switch shut down systems.
  • Electronic ignition controls with a thermostat for accurate temperature control and 24 hour delay timer.
  • Quiet, high performance filtered multi-speed fan, with air outlet at floor level, provides rapid spread of warmth.
  • LP Gas Consumption : Low 0.09kg/ hr. High 0.28kg/ hr
  • Dual programmable timers – for mornings and evenings
  • Remote control
  • This heater MAY NOT be installed in a room smaller than 62.5m ³
  • Dimensions (HxWxD) : 485 x 610 x 245mm
  • Colours: White or Platinum Silver
  • Gas Type: LP Gas & Natural Gas
  • This heater MAY NOT be installed in a room smaller than 32.5m³

R12,700.00 Inc VAT
Eskabe Wall-Mounted 35m² Gas Heater – with Flue & Titanium Cover – (TB5 TT)

PRODUCT DESCRIPTION

  •  Manufactured in Spain.
  • Heating Capacity: 35m²
  • Must be installed on inside wall, with flue pipe passing through the wall to outside.
  • Can be used for any room but specifically designed for bedrooms/ bathrooms/ small living spaces
  • Eskabe Heaters do not use electricity (battery ignited)
  • Uses 3-dimensional heat dispersion
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • Thermostat ensures efficiency & comfort.
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  •  Heating Capacity: Up to 35m
  • Power Input (Kcal/h): 5000
  • Power Input (KW): 5.8
  • Fuel: LPG/ Propane or Natural Gas
  • Max Consumption (LPG/ Natural Gas): 0.40kgh/ 20.93MJ
  • Height: 51cm
  • Width: 70cm
  • Depth: 17cm

R7,660.00 Inc VAT
Eskabe Wall-Mounted 30m² Gas Heater – with Flue (TB5)

PRODUCT DESCRIPTION

  •  Manufactured in Spain.
  • Must be installed on an inside wall, with flue pipe passing through the wall to outside.
  • Eskabe Gas Heaters do not require electricity (battery ignited).
  • Can be used for any room but specifically designed for bedrooms/ bathrooms/ small living spaces.
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  •  Heating Capacity: Up to 30m²
  • Power Input (Kcal/h): 5000
  • Power Input (KW): 5.8
  • Fuel: LPG/ Propane or Natural Gas
  • Max Consumption (LPG/ Natural Gas): 0.40kgh/ 20.93MJ
  • Height: 51cm
  • Width: 70cm
  • Depth: 17cm

R5,990.00 Inc VAT
Eskabe Wall-Mounted 25m² Gas Heater – with Flue & Titanium Cover – (TB3 TT)

PRODUCT DESCRIPTION

  •  Manufactured in Spain.
  • Must be installed on an inside wall, with flue pipe passing through wall to outside.
  • Can be used for any room but specifically designed for bathrooms/ bedrooms/ small living spaces
  • Eskabe Gas Heaters do not require electricity (battery ignited).
  • Titanium cover
  • 3-dimensional heat dispersion
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • Thermostat ensures efficiency & comfort.
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  •  Heating Capacity: Up to 25m²
  • Power Input (Kcal/h): 3000
  • Power Input (KW): 3.5
  • Fuel: LPG/ Propane or Natural Gas
  • Max Consumption (LPG/ Natural Gas): 0.22kgh/ 12.96MJ
  • Height: 51cm
  • Width: 44cm
  • Depth: 15cm

R7,195.00 Inc VAT
Eskabe Wall-Mounted 20m² Gas Heater – with Flue (TB3)

PRODUCT DESCRIPTION

  •  Manufactured in Spain.
  • Must be installed on an inside wall, with flue passing through wall to outside.
  • Eskabe Gas Heaters do not require electricity (battery ignited).
  • Can be used for any room, but specifically designed for bathrooms/ bedrooms/ small living spaces
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  •  Heating Capacity: Up to 20m²
  • Power Input (Kcal/h): 3000
  • Power Input (KW): 3.5
  • Fuel: LPG/ Propane or Natural Gas
  • Max Consumption : 0.22kgh/ 13MJ
  • Height: 51cm
  • Width: 44cm
  • Depth: 16cm

R4,620.00 Inc VAT
Eskabe Wall-Mounted 50m² Gas Heater – Unvented & Titanium Cover (MX8 TT)

PRODUCT DESCRIPTION

  •  Manufactured in Spain.
  • Eskabe Gas Heaters do not require electricity (battery ignited).
  • TT models have titanium covers & 3-dimensional heat dispersion.
  • Easy installation: no building-in of outside ventilation, avoiding breaking of walls.
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  •  Heating Capacity: Up to 50m²
  • Power Input (Kcal/h): 8000
  • Power Input (KW): 9.3
  • Fuel: LPG/ Propane or Natural Gas
  • Consumption: 31Mj/hour
  • Height: 50.8cm
  • Width: 69.5cm
  • Depth: 16.6cm
  • Vent Opening Required: 16.6cm

R5,710.00 Inc VAT
Paloma Installed 93m² Gas Heater – Natural Gas (W25FRN)

PRODUCT DESCRIPTION

  • Max Room Capacity 93m (squared)
  •  Manufactured in Japan
  • Flueless
  • Requires electrical connection for ignition only
  • Operates on LP Gas & Natural Gas
  • Fast heat up time
  • Lightweight
  • Low gas consumption
  • Low electrical consumption
  • Low standby power
  • Low emission technology
  • Timers which allow the heater to switch on automatically at 2 separate times during the day.
  • Quick Release Adaptors can be fitted in your living rooms so heater can be moved to where it is needed most (optional extra)
  • Cannot be used in bedrooms or bathrooms

TECHNICAL DATA

  •  Type: Convection Heater
  • Gas Input (MJ/h)  HighNG: 25
  • LPG: 23
  • Gas Input (MJ/h)  LowNG: 9
  • LPG: 8.2
  • Heater Output (kW): 6.1
  • AS4553 Efficiency Star Rating: 3.9
  • LPG: 3.6
  • Minimum Room Size (m3): 62.5
  • Max. Heating Capacity – Mild Climate (m2)*: 93
  • Gas Hose Length (m): 3
  • Electrical Power Cord Length (m): 3
  • Standby Electrical Consumption (w): 1
  • Colour: Off White

DIMENSIONS

  •  (h) 494mm x (w) 531mm x (d) 237mm
  • Net Weight (kg): 12.7

R12,400.00 Inc VAT
New!
Eskabe Wall–Mounted 45m² Gas Heater – Unvented (MX8)

PRODUCT DESCRIPTION

  • Manufactured in Spain.
  • Unvented gas heaters may not be installed in bedrooms/ bathrooms/ very small living spaces
  • Eskabe Gas Heaters do not require electricity (battery ignited)
  • Easy installation: no building-in of outside ventilation, avoiding breaking of walls.
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • Fitted with a Room Aromatiser which allows you to perfume the room.
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  • Heating Capacity: Up to 45m²
  • Power Input (Kcal/h): 8000
  • Power Input (KW): 9.3
  • Fuel: LPG/ Propane or Natural Gas
  • Consumption: 31Mj/ hour
  • Height: 50.8cm
  • Width: 69.5cm
  • Depth: 16.6cm

R4,970.00 Inc VAT
New!
Eskabe Wall–Mounted 30m² Gas Heater – Unvented (MX5)

PRODUCT DESCRIPTION

  • Manufactured in Spain.
  • Ventless Gas Heaters may not be installed in bedrooms/ bathrooms/ very small living spaces
  • Eskabe Gas Heaters do not require an electrical connection (battery ignited)
  • Easy installation: no building-in of outside ventilation, avoiding breaking of walls.
  • Convection: designed to cause a stream of heated air to circulate throughout the room to give an even temperature throughout the room.
  • Slimline Design
  • External bulb sensor : externally mounted sensor system which regulates power to keep the desired room temperature, thus saving on gas.
  • Monoxiprotector: prevents the release of combustion products into the room under abnormal draught conditions.
  • Oxygen Depletion Sensor: monitors the room’s oxygen level & automatically shuts off gas supply if oxygen level decreases.
  • Safety Valve: automatically shuts off gas supply to the unit in the event of a pilot burner or gas supply failure.
  • Sealed combustion chamber ensures safe performance by separating the heated air from the combustion gases, which are expelled outside.
  • 1 year warranty

TECHNICAL DATA

  • Heating Capacity: Up to 30m²
  • Power Input (Kcal/h): 5000
  • Power Input (KW): 5.81
  • Power Input (Btu/h):
  • Fuel: LPG/ Propane or Natural Gas
  • Consumption: 31Mj/hour
  • Height: 50.8cm
  • Width: 44.1cm
  • Depth: 14.8cm

R4,410.00 Inc VAT
  • 1
  • 2
Mobile version: Enabled