- Home
- Products
- USEFUL INFORMATION
- Blog
- About Us
- Contact Us
Loading the content... Loading depends on your connection speed!
| 082 452 4488 | All Appliances LPGSSA approved | 
- Sign In /
Camping Freezers – How Absorption Cooling Works
How Absorption Cooling Works
An absorption refrigerator is a fridge or freezer that uses a heat source (e.g. solar energy, a fossil-fueled flame, waste heat from factories, or district heating systems) to provide the energy needed to drive the cooling process.
Absorption refrigerators are often used for food storage in recreational vehicles.
Principles
Both absorption and compressor refrigerators use a refrigerant with a very low boiling point (less than 0 °F / −18 °C). In both types, when this refrigerant evaporates (boils), it takes some heat away with it, providing the cooling effect. The main difference between the two systems is the way the refrigerant is changed from a gas back into a liquid so that the cycle can repeat. An absorption refrigerator changes the gas back into a liquid using a method that needs only heat, and has no moving parts other than the refrigerant itself.
The absorption cooling cycle can be described in three phases:
- Evaporation: – A liquid refrigerant evaporates in a low partial pressure environment, thus extracting heat from its surroundings (e.g. the refrigerator’s compartment). Because of the low partial pressure, the temperature needed for evaporation is also low.
- Absorption: – The now gaseous refrigerant is absorbed by another liquid (e.g. a salt solution).
- Regeneration: – The refrigerant-saturated liquid is heated, causing the refrigerant to evaporate out. The hot gaseous refrigerant passes through a heat exchanger, transferring its heat outside the system (such as to surrounding ambient-temperature air), and condenses. The condensed (liquid) refrigerant supplies the evaporation phase.
In comparison, a compressor refrigerator uses an electrically powered compressor to increase the pressure on the gaseous refrigerant, the resulting hot high pressure gas is condensed to a liquid form by cooling in a heat exchanger with the external environment (usually air in the room). The condensed refrigerant now at a temperature near to that of the external environment, then passes through an orifice or a throttle valve into the evaporator section. The orifice or throttle valve creates a pressure drop between the high pressure condenser section and the low pressure evaporator section. The lower pressure in the evaporator section allows the liquid refrigerant to evaporate more easily and in the process of evaporating, absorb heat from the refrigerator food compartment. The vaporized refrigerant then goes back into the compressor to repeat the cycle.
Another difference between the two types is the refrigerant used. Compressor refrigerators typically use an HCFC or HFC, while absorption refrigerators typically use ammonia or water.
Mobile version:
Enabled