Technical Specifications

• Manufactured in Japan since 1930
• Paloma 20l & 26l models have been custom made for South African conditions & altitude variations within South Africa.
• Operate on either LP Gas or Natural Gas.
• Paloma geysers can supply multiple hot water outlets simultaneously
• Electrically ignited. Can be operated on generator/ inverter/ solar/ computer UPS
• For outdoor installation.
• Flueless
• Paloma units can be installed on existing or new solar systems to boost or back-up solar generated hot water.
• Flamesafe Protection Systems that automatically shut down the geyser should a fault occur.
• Optional Remote Control allowing easy setting of water temperatures. Deluxe controllers also offer ‘Bath Fill’ mode & shut-off safety features.
• EZ-Link allows homes with greater demand for hot water, or areas where ambient temperatures are very low, to link two geysers together to deliver twice the flow.
• Intelligent hot water delivery using sensor controlled heating to ensure constant water temperature & ensuring only the minimum amount of gas is used at any one time.
• Sensor controlled water pressure monitor which automatically adjusts water pressure entering the geyser.
• LED Error Code Display which will display an error code if the geyser should stop operating for any reason. A full list of error codes & solutions can be found in the user manual.
• ICAD Safety – this is a sensor which monitors combustion products. If excessive levels reached the unit will shut off automatically, ensuring no harmful by-products are emitted.
• 10 year warranty on the Heat Exchanger unit. 3 year warranty on all piping. 1 year warranty on electronic components.

• Capacity: 2.5-20l/ min
• Gas Combustion (min-max): LPG: 0.41-3.1kg/ hrNG: 21-153 Mj/ hr
• Electrical Consumption (w): 61 @ 230v
• Ignition & Combustion System: Continuous electronic spark with low NOx emission burner
• Min Water Pressure: 80 kPa
• Max Water Pressure: 1000kPa
• Gas & Water Connections: ¾” or 20mm

• h 520mm x 350mm x 150mm
• Weight: 17 kg

• Manufactured in Japan since 1930.
• Paloma 20l, 26l & 27l models have been custom made for South African conditions & altitude variations within South Africa.
• Operate on either LP Gas or Natural Gas.
• Paloma geysers can supply multiple hot water outlets simultaneously
• Electrically ignited. Can be operated on generator/ inverter/ Computer UPS.
• For indoor installation only .
• Geyser must be fitted with a flue pipe (price not included in geyser price)
• Paloma units can be installed on existing or new solar systems to boost or back-up solar generated hot water.
• Flamesafe Protection Systems that automatically shut down the geyser should a fault occur.
• Optional Remote Control allowing easy setting of water temperatures. Deluxe controllers also offer ‘Bath Fill’ mode & shut-off safety features.
• EZ-Link allows homes with greater demand for hot water, or areas where ambient temperatures are very low, to link two geysers together to deliver twice the flow.
• Intelligent hot water delivery using sensor controlled heating to ensure constant water temperature & ensuring only the minimum amount of gas is used at any one time.
• Sensor controlled water pressure monitor which automatically adjusts water pressure entering the geyser.
• LED Error Code Display which will display an error code if the geyser should stop operating for any reason. A full list of error codes & solutions can be found in the user manual.
• ICAD Safety – this is a sensor which monitors combustion products. If excessive levels reached the unit will shut off automatically, ensuring no harmful by-products are emitted.
• 10 year warranty on the Heat Exchanger unit. 3 year warranty on all piping. 1 year warranty on electronic components.

• Capacity: 2.5-27l/ min
• Gas Combustion (min-max): LPG/ NG :LPG: 0.3 – 4.1 kg/ hr
• Electrical Consumption (w): 67 @ 230v
• Ignition & Combustion System: Continuous electronic spark with low NOx emission burner
• Min Water Pressure: 80 kPa
• Max Water Pressure: 1000kPa
• Gas & Water Connections: ¾” or 20mm

• h 565mm x 350mm x 195mm
• Weight: 20.8 kg

• Flow sensors ensure water temperature stability
• LCD Control Display to set water temperature
• Automatic flame height/ water flow control
• Constant temperature with varying water flow
• For outdoor use only
• Does not need a flue pipe
• Must have a Dewhot Weather Cover if it will be positioned where it will be rained on
• Water Pressure: 0.3- 5 bar
• Dimensions: 485 x 730 x 220 mm (WxHxD)
• 1 year warranty

• Geyser must have 220v plug point (for ignition & electronic control systems)
• Price includes Flue Pipe
• For indoor or outdoor installation.
• If the  geyser is positioned where it will be rained on , it will need a weather cover.
• Can run 1x hot tap at a time.
• Can supply hot water to upstairs bathroom.
• 1 year warranty

•  Up to 60C
• Optional programmable remote controllers allow you to precisely set the temperatures in different rooms. Should you choose not to take a controller the temperatures will be pre-set. Only qualified gas installers are authorised to change any settings inside the cover of a Paloma Gas Geyser.
• Allows you to pre set the water temperature in different rooms
• Comes with a bath-fill function (alarm sound) to turn off the “hot water” bath tap when the bath has reached the desired level
• Remote Controllers Not wireless. Must be connected to geyser with normal 2-flex speaker cable (not included). Cable either be supplied to you by your gas installer/ electrician, or you can purchase it yourself from most hardware stores where it will be cut-to-measure & connectors will be fitted for you.

• Lightweight and handle for easy carrying
• Automatic ignition
• Adjustable Temperature
• Safety sensor to prevent scalding
• Oxygen depletion sensor protection
• Includes: shower head and hose
• Optional Extras include 12v Pump, Battery Connections, Cigarette Lighter Connection & Geyser Stand.
• 1 Year Warranty
• Dimensions: 293 (W) x 130 (D) x 379 (H)
• Weight: 4.4kg

• 11 Litres per minute
• Battery Ignited
• LPG (butane/propane) 28 (2.8) mbar (kPa)
• Temperature control at maximum setting: – Ambient +50°C – Flow Rate 2.0 – 5.5 l/min
• Temperature control at minimum setting: – Ambient +25°C – Flow Rate 4.0 – 11.0 l/min
• Shower or Basin/ Sink (distance dependant)
• Manufactured in Portugal, under direct supervision of the parent company in Germany.
• Geysers will ignite in low water pressure conditions (ie 1 bar).
• Approved for indoor or outdoor installation. Geysers installed indoors must, by law, be fitted with a flue pipe which exits the building (either via the exterior wall or vertically via the roof – may not end in ceiling).
• Flue pipes are required for Bosch geysers installed outdoors – without this the geyser will overheat & keep switching itself off.
• 2 year warranty, providing the geyser is installed by a qualified & registered gas installer.
• Dimensions : 400 (D) x 270 (W) x 770 (H) mm.