- Home
- Products
- USEFUL INFORMATION
- Blog
- About Us
- Contact Us
Loading the content... Loading depends on your connection speed!
| 082 452 4488 | All Appliances LPGSSA approved | 
- Sign In /
Related Products
PRODUCT DESCRIPTION
SPECIAL:
- Manufactured in Japan since 1930.
- Paloma 20l & 26l models have been custom made for South African conditions & altitude variations within South Africa.
- Operate on either LP Gas or Natural Gas.
- Paloma geysers can supply multiple hot water outlets simultaneously
- Electrically ignited. Can be operated on generator/ inverter/ Computer UPS.
- For outdoor installation.
- Flueless
- Paloma units can be installed on existing or new solar systems to boost or back-up solar generated hot water.
- Flamesafe Protection Systems that automatically shut down the geyser should a fault occur.
- Optional Remote Control allowing easy setting of water temperatures. Deluxe controllers also offer ‘Bath Fill’ mode & shut-off safety features.
- EZ-Link allows homes with greater demand for hot water, or areas where ambient temperatures are very low, to link two geysers together to deliver twice the flow.
- Intelligent hot water delivery using sensor controlled heating to ensure constant water temperature & ensuring only the minimum amount of gas is used at any one time.
- Sensor controlled water pressure monitor which automatically adjusts water pressure entering the geyser.
- LED Error Code Display which will display an error code if the geyser should stop operating for any reason. A full list of error codes & solutions can be found in the user manual.
- ICAD Safety – this is a sensor which monitors combustion products. If excessive levels reached the unit will shut off automatically, ensuring no harmful by-products are emitted.
- 10 year warranty on the Heat Exchanger unit. 3 year warranty on all piping. 1 year warranty on electronic components.
TECHNICAL DATA
- Capacity: 2.5-26l/ min
- Gas Combustion (min-max): LPG:LPG: 0.33-3.9kg/ hrNG: 19-199 Mj/hr
- Electrical Consumption (w): 64 @ 230v
- Ignition & Combustion System: Continuous electronic spark with low NOx emission burner
- Min Water Pressure: 80 kPa
- Max Water Pressure: 1000kPa
- Gas & Water Connections: ¾” or 20mm
Dimensions
- (H) 51.5cm x (W) 35.5cm x (D) 17.5cm
- Weight: 20.8 kg
R14,150.00 Inc VAT
PRODUCT DESCRIPTION
- Rinnai 26 litre gas geyser is ideal for 2 – 3 bedroomed homes
- Low running costs & high efficiency rating
- Precise temperature control
- Compatible with low flow rated shower fixtures (7.0 – 9.0 litres per minute)
- 10 year warranty
- Factory Default Temperature: 50-55C
- Minimum water pressure (kPa): 200
- Maximum water pressure (kPa): 1000
- Gas Rate Mon/Max (LPG): 0.29/4.00
- Flow rate 25 DegreesC/Max: 26/26 (l/min)
- Status Monitor: No
DIMENSIONS
- (h) 530mm x (w) 350mm x (d) 194mm
R14,900.00 Inc VAT
PRODUCT DESCRIPTION
- Manufactured in Japan since 1930.
- Paloma 20l, 26l & 27l models have been custom made for South African conditions & altitude variations within South Africa.
- Operate on either LP Gas or Natural Gas.
- Paloma geysers can supply multiple hot water outlets simultaneously
- Electrically ignited. Can be operated on generator/ inverter/ Computer UPS.
- For indoor installation only .
- Geyser must be fitted with a flue pipe (price not included in geyser price)
- Paloma units can be installed on existing or new solar systems to boost or back-up solar generated hot water.
- Flamesafe Protection Systems that automatically shut down the geyser should a fault occur.
- Optional Remote Control allowing easy setting of water temperatures. Deluxe controllers also offer ‘Bath Fill’ mode & shut-off safety features.
- EZ-Link allows homes with greater demand for hot water, or areas where ambient temperatures are very low, to link two geysers together to deliver twice the flow.
- Intelligent hot water delivery using sensor controlled heating to ensure constant water temperature & ensuring only the minimum amount of gas is used at any one time.
- Sensor controlled water pressure monitor which automatically adjusts water pressure entering the geyser.
- LED Error Code Display which will display an error code if the geyser should stop operating for any reason. A full list of error codes & solutions can be found in the user manual.
- ICAD Safety – this is a sensor which monitors combustion products. If excessive levels reached the unit will shut off automatically, ensuring no harmful by-products are emitted.
- 10 year warranty on the Heat Exchanger unit. 3 year warranty on all piping. 1 year warranty on electronic components.
TECHNICAL DATA
- Capacity: 2.5-27l/ min
- Gas Combustion (min-max): LPG/ NG :LPG: 0.3 – 4.1 kg/ hr
- Electrical Consumption (w): 67 @ 230v
- Ignition & Combustion System: Continuous electronic spark with low NOx emission burner
- Min Water Pressure: 80 kPa
- Max Water Pressure: 1000kPa
- Gas & Water Connections: ¾” or 20mm
Dimensions
- h 565mm x 350mm x 195mm
- Weight: 20.8 kg
R14,200.00 Inc VAT
PRODUCT DESCRIPTION
- Battery ignited
- Designed for farms/ plots or properties with low water pressure
- Outdoor Installation only
- Operates on LP Gas
- Must be fitted with a 130mm Flue Pipe & Cowl
- Temperature Control with digital display
- Packaged Dimensions: 710 x 420 x 210 mm
- Weight: 13.5kg
- Low starting Water Pressure
- Will supply two hot taps with constant water temperature
- LPGSA/ SANS/ SABS Approved
- 1 year warranty
- Geyser must be installed by a qualified & registered gas installer or the warranty will not be valid
- Prices do not include installation
- Gas consumption: 2.65 kg/hr
- Rated input: 32kW
- Rated output: 28.8kW
- Water flow min: 360 lt/hr
- Water flow max: 960 lt/hr
R7,350.00 Inc VAT
PRODUCT DESCRIPTION
- 11 Litres per minute
- Battery Ignited
- LPG (butane/propane) 28 (2.8) mbar (kPa)
- Temperature control at maximum setting: – Ambient +50°C – Flow Rate 2.0 – 5.5 l/min
- Temperature control at minimum setting: – Ambient +25°C – Flow Rate 4.0 – 11.0 l/min
- Shower or Basin/ Sink (distance dependant)
- Manufactured in Portugal, under direct supervision of the parent company in Germany.
- Geysers will ignite in low water pressure conditions (ie 1 bar).
- Approved for indoor or outdoor installation. Geysers installed indoors must, by law, be fitted with a flue pipe which exits the building (either via the exterior wall or vertically via the roof – may not end in ceiling).
- Flue pipes are required for Bosch geysers installed outdoors – without this the geyser will overheat & keep switching itself off.
- 2 year warranty, providing the geyser is installed by a qualified & registered gas installer.
- Dimensions : 400 (D) x 270 (W) x 770 (H) mm.
R5,650.00 Inc VAT
ADVICE ON WHICH GEYSER TO CHOOSE
PRODUCT DESCRIPTION
- Lightweight and handle for easy carrying
- Automatic ignition
- Adjustable Temperature
- Includes: shower head and hose
- Does not include water pump or gas connection
- 1 Year Warranty
- Dimensions: 280 (W) x 125 (D) x 370 (H)mm
- Weight: 4.4kg
R2,855.00 Inc VAT
PRODUCT DESCRIPTION
- Indoor & outdoor installation
- Battery ignited
- Operates on LP Gas
- Temperature Control with digital display
- Compact size unit
- Dimensions: 700 x 440 x 210 mm
- Low starting Water Pressure
- High energy efficiency with no holding tank
- LPGSA, SANS & SABS Certified unit
- 1 year warranty
- Geyser must be installed by a qualified & registered gas installer or the warranty will not be valid (to find a qualified gas installer in your area, visit ‘Installations’ page on our Home page).
- Prices do not include installation.
- FOR MORE INFORMATION ON GAS GEYSERS VISIT THE ‘GAS QUESTIONS’ PAGE ON OUR HOME PAGE.
R6,200.00 Inc VAT
PRODUCT DESCRIPTION
- Indoor or outdoor installation
- Battery ignited
- Operates on LP Gas
- Temperature Control with digital display
- Compact size unit
- Low starting Water Pressure
- High energy efficiency with no holding tank
- Dimensions: 440 x 300 x 140 mm
- LPGSA, SANS & SABS Certified unit
- 1 year warranty
- Geyser must be installed by a qualified gas installer or the warranty will not be valid (to find a qualified gas installer in your area ,visit ‘Installations’ on our Home Page’)
- Prices do not include installation.
- FOR MORE INFORMATION ON GAS GEYSERS VISIT THE ‘GAS QUESTIONS’PAGE ON OUR HOME PAGE
R2,400.00 Inc VAT
PRODUCT DESCRIPTION
- Rinnai 32 litre gas geyser is designed for homes with large hot water needs (eg 3+ bedroomed homes)
- Variable flow rate of up to 37 litres per minute
- Low running costs & high efficiency rating
- Precise temperature control
- Compatible with low flow rated shower fixtures (7.0 to 9.0 litres/ min)
- 10 year warranty
- Factory default temperature setting: 50-55C
- Minimum water pressure (kPa): 190
- Maximum water pressure (kPa): 1000
- Gas rate Min/Max (LPG): 0.42/5.00
- Status monitor: No
DIMENSIONS
- (h) 600mm x (w) 470mm x (d) 244mm
R25,000.00 Inc VAT
PRODUCT DESCRIPTION
- Rinnai 26 litre gas geyser is ideal for 2 – 3 bedroomed homes
- Low running costs & high efficiency rating
- Precise temperature control
- Compatible with low flow rated shower fixtures (7.0 – 9.0 litres per minute)
- 10 year warranty
- Factory Default Temperature: 50-55C
- Minimum water pressure (kPa): 200
- Maximum water pressure (kPa): 1000
- Gas Rate Mon/Max (LPG): 0.29/4.00
- Flow rate 25 DegreesC/Max: 26/26 (l/min)
- Status Monitor: No
DIMENSIONS
- (h) 530mm x (w) 350mm x (d) 194mm
R17,600.00 Inc VAT
PRODUCT DESCRIPTION
- Flow sensors ensure water temperature stability
- LCD Control Display to set water temperature
- Automatic flame height/ water flow control
- Constant temperature with varying water flow
- For outdoor use only
- Does not need a flue pipe
- Must have a Dewhot Weather Cover if it will be positioned where it will be rained on
- Water Pressure: 0.3- 5 bar
- Dimensions: 485 x 730 x 220 mm (WxHxD)
- 1 year warranty
R7,770.00 Inc VAT
PRODUCT DESCRIPTION
- Geyser must have 220v plug point (for ignition & electronic control systems)
- Price includes Flue Pipe
- For indoor or outdoor installation.
- If the geyser is positioned where it will be rained on , it will need a weather cover.
- Can run 1x hot tap at a time.
- Can supply hot water to upstairs bathroom.
- 1 year warranty
R5,830.00 Inc VAT
PRODUCT DESCRIPTION
- For Atlas 8l/ 10l/ 12l / 16l geysers (Atlas 16l Zero Start geyser takes 130mm Flue Pipe)
- Used for indoor installations &/or for installations on thatch-roofed houses
- Elbow Flue Pipe cannot be directly fitted onto geyser. Must first fit vertical flue of min 650mm length.
R150.00 Inc VAT
Mobile version:
Enabled