•  Indoor or outdoor installation
• Battery ignited
• Operates on LP Gas
• Temperature Control with digital display
• Compact size unit
• Low starting Water Pressure
• High energy efficiency with no holding tank
• Dimensions: 520 x 320 x 165 cm
• LPGSA, SANS & SABS Certified unit
• Prices do not include installation.
• 1 year warranty
• Geyser must be installed by a qualified gas installer or the warranty will not be valid (to find a qualified gas installer in your area, visit ‘Installations’ on our Home Page).
• FOR MORE INFORMATION ON GAS GEYSERS VISIT THE ‘GAS QUESTIONS’ PAGE ON OUR HOME PAGE

• For Atlas 8l/ 10l/ 12l / 16l geysers (Atlas 16l Zero Start geyser takes 130mm Flue Pipe)
• Used for indoor installations &/or for installations on thatch-roofed houses
• Elbow Flue Pipe cannot be directly fitted onto geyser. Must first fit vertical flue of min 650mm length.

• Galvanised Steel
• 1.3m long x 110mm diameter
• Note: Bosch geysers must be fitted with a flue pipe and cowl – without this the geyser will overheat and keep switching off.

• For Atlas 6l geyser
• Used for indoor installations &/or for installation on thatch roofed houses
• Elbow Flue Pipe cannot be fitted directly onto geyser. Must first fit vertical flue of min 650mm lenth.

• Manufactured in Japan since 1930.
• Paloma 20l & 26l models have been custom made for South African conditions & altitude variations within South Africa.
• Operate on either LP Gas or Natural Gas.
• Paloma geysers can supply multiple hot water outlets simultaneously
• Electrically ignited. Can be operated on generator/ inverter/ Computer UPS.
• For outdoor installation.
• Flueless
• Paloma units can be installed on existing or new solar systems to boost or back-up solar generated hot water.
• Flamesafe Protection Systems that automatically shut down the geyser should a fault occur.
• Optional Remote Control allowing easy setting of water temperatures. Deluxe controllers also offer ‘Bath Fill’ mode & shut-off safety features.
• EZ-Link allows homes with greater demand for hot water, or areas where ambient temperatures are very low, to link two geysers together to deliver twice the flow.
• Intelligent hot water delivery using sensor controlled heating to ensure constant water temperature & ensuring only the minimum amount of gas is used at any one time.
• Sensor controlled water pressure monitor which automatically adjusts water pressure entering the geyser.
• LED Error Code Display which will display an error code if the geyser should stop operating for any reason. A full list of error codes & solutions can be found in the user manual.
• ICAD Safety – this is a sensor which monitors combustion products. If excessive levels reached the unit will shut off automatically, ensuring no harmful by-products are emitted.
• 10 year warranty on the Heat Exchanger unit. 3 year warranty on all piping. 1 year warranty on electronic components.

• Capacity: 2.5-26l/ min
• Gas Combustion (min-max): LPG:LPG: 0.33-3.9kg/ hrNG: 19-199 Mj/hr
• Electrical Consumption (w): 64 @ 230v
• Ignition & Combustion System: Continuous electronic spark with low NOx emission burner
• Min Water Pressure: 80 kPa
• Max Water Pressure: 1000kPa
• Gas & Water Connections: ¾” or 20mm

•  (H) 51.5cm x (W) 35.5cm x (D) 17.5cm
• Weight: 20.8 kg

• If geyser will be positioned where it will be rained on, or face into strong winds, it will need a weather cover for protection.
• Galvanised Steel
• 500 x 770 x 260mm
• 7kg

• If geyser will be positioned where it will be rained on, or face into strong winds, it will need a weather cover for protection.
• Galvanised Steel
• 400 x 690 x 260mm
• 7kg

• Temperature display
• Self-Diagnosis
• Must be connected to geyser with cable

• Indoor & outdoor installation
• Battery ignited
• Operates on LP Gas
• Temperature Control with digital display
• Compact size unit
• Dimensions: 550 x 330 x 195 mm
•  Low starting Water Pressure
• High energy efficiency with no holding tank
• LPGSA, SANS & SABS Certified unit
• 1 year warrant
• Geyser must be installed by a qualified & registered gas installer or the warranty will not be valid (to find a qualified gas installer in your area, visit ‘Installations’ on our Home Page’
• Prices do not include installation.
• FOR MORE INFORMATION ON GAS GEYSERS VISIT THE ‘GAS QUESTIONS’ PAGE ON OUR HOME PAGE

• 14 Litres per minute
• Battery Operated
• LPG (butane/propane): 28 (2.8) mbar (kPa)
• Temperature control at maximum setting: – Ambient +50°C – Flow Rate 2.0 – 7.0 l/min
• Temperature control at minimum setting: – Ambient +25°C – Flow Rate 4.0 – 14.0 l/min
• Bath/ shower + basin or sink (distance dependant)
• Manufactured in Portugal, under direct supervision of the parent company in Germany.
• Geysers will ignite in low water pressure conditions (ie 1 bar).
• Approved for indoor or outdoor installation. Geysers installed indoors must, by law, be fitted with a flue pipe which exits the building (either via the exterior wall or vertically via the roof – may not end in ceiling).
• Flue pipes are required for Bosch geysers installed outdoors – without this the geyser will overheat & keep switching itself off.
• 2 year warranty, providing the geyser is installed by a qualified & registered gas installer.
• Dimensions : 400 (D) x 270 (W) x 770 (H) mm.

Technical Specifications

• Rinnai 26 litre gas geyser is ideal for 2 – 3 bedroomed homes
• Low running costs & high efficiency rating
• Precise temperature control
• Compatible with low flow rated shower fixtures (7.0 – 9.0 litres per minute)
• 10 year warranty
• Factory Default Temperature: 50-55C
• Minimum water pressure (kPa): 200
• Maximum water pressure (kPa): 1000
• Gas Rate Mon/Max (LPG): 0.29/4.00
• Flow rate 25 DegreesC/Max: 26/26 (l/min)
• Status Monitor: No

• (h) 530mm x (w) 350mm x (d) 194mm

• Lightweight and handle for easy carrying
• Automatic ignition
• Adjustable Temperature
• Includes: shower head and hose
• Does not include water pump or gas connection
• 1 Year Warranty
• Dimensions: 280 (W) x 125 (D) x 370 (H)mm
• Weight: 4.4kg